#1: ID Badge & Card Racks for Wall or Desktop

ID Card & Badge Racks

Wall Mount ID Badge Racks feature all metal construction, in sizes to fit standard credit card size cards as well as other size employee badges. These ID card racks offer a durable powder coat finish and are available in 12 attractive colors and STAINLESS STEEL. Badge racks for vertical or horizontal printed ID cards as well as special locking Badge Rack SECURITY OPTIONS and DESK MOUNT Badge Racks models are offered.

Made in the USA

NEED HELP?

Racks are available in the following colors
Gray is standard

Due to differences in monitors, settings, etc. colors are
approximations only, actual color may vary from above samples.

Model	Capacity	rack height	rack width	rack depth	pocket width	pocket depth	pocket thickness	exposure	Suggested Badge Height
Dimensions are in inches
190	40 badges	32	4-1/2	3/4	3-3/4	1-3/8	3/16	5/8	2-1/8
190H	25 badges	20-7/8	4-1/2	3/4	3-3/4	1-3/8	3/16	5/8	2-1/8
190H-2	50 badges	20-7/8	9	3/4	3-3/4	1-3/8	3/16	5/8	2-1/8
190-15-WM	15 badges	9	4-1/2	11	3-3/4	1-3/8	3/16	5/8	2-1/8
190-30-WM	30 badges	13-3/4	9-1/2	3/4	3-3/4	1-3/8	3/16	5/8	2-1/8
190-45-WM	45 badges	13-3/4	13-1/2	3/4	3-3/4	1-3/8	3/16	5/8	2-1/8
150	25 badges	33-1/2	5-1/4	3/4	4-9/16	1-1/4	3/16	1-1/4	2-1/8
170	40 badges	33-1/4	3-1/4	1- 1/8	2-1/2	2-3/8	1/8	5/8	3-1/4
170H	25 badges	21-7/8	3-1/4	1 1/8	2-1/2	2-3/8	1/8	5/8	3-1/4
160	30 badges	31-1/2	4-1/2	1/2	3-7/8	1	3/16	1	2-1/8
160-10	10 badges	11-3/4	4-1/2	1/2	3-7/8	1	3/16	1	2-1/8
160-20	20 badges	11-3/4	9	1/2	3-7/8	1	3/16	1	2-1/8
Security Badge Racks
Custom 50	50 badges	31-1/2	9-3/8 open 4-5/8 closed	1-1/2	3-7/8	1	3/16	1	2-1/8
Custom 30	30 badges	21-3/4	9-3/8 open 4-5/8 closed	1-1/2	3-7/8	1	3/16	1	2-1/8
Desk Mount Badge Racks
190-15-DM	15 badges	9	4-1/2	11	3-3/4	1-3/8	3/16	5/8	2-1/8
190-30-DM	30 badges	9	9	11	3-3/4	1- 3/8	3/16	5/8	2-1/8
190-45-DM	45 badges	9	13-1/2	11	3-3/4	1- 3/8	3/16	5/8	2-1/8
160-10-DM	10 badges	8	4-1/2	10	3-7/8	1	3/16	1	2- 1/8
160-20-DM	20 badges	8	9	10	3-7/8	1	3/16	1	2 -1/8
160-30-DM	30 badges	8	13-1/2	10	3-7/8	1	3/16	1	2 -1/8
Stainless Steel Badge Racks
190S	40 badges	32	4-1/2	3/4	3-3/4	1-3/8	3/16	5/8	2-1/8
190HS	25 badges	20-7/8	4-1/2	3/4	3-3/4	1-3/8	3/16	5/8	2-1/8
160S	30 badges	31-1/2	4-1/2	1/2	3-7/8	1	3/16	1	2-1/8
170HS	25 badges	21-7/8	3-1/4	1-1/8	2-1/2	2-3/8	1/8	5/8	3-1/4
170S	40 badges	33-1/4	3-1/4	1-1/8	2-1/2	2-3/8	1/8	5/8	3-1/4

Diagram is for example only, actual
rack dimensions vary with each model.

The overall rack dimensions height (A), width (B) and depth (C) are important when considering the space required for mounting on your wall.

The pocket width (D) is the maximum width card that can fit into the pocket.

The exposure (E) of most racks is 3/4 to 1 inch. This is the distance between one pocket and the next pocket. Once the card height exceeds the pocket depth by the amount of the rack's exposure, a taller card will gain no further exposure. For example the numbers 1, 2 and 3 appear on the bottom card but only the number 1 appears on the cards above it. Given a 7.00" card and a 3.875" pocket depth, 3.125" of the bottom card is exposed (H) but only the top 1.00" of the other cards is exposed, due to the racks exposure of 1.00". Putting cards in only every other pocket gives double the exposure as indicated by the top three sample cards placed.

When choosing the pocket depth (F), be sure the pertinent card information for retrieval will be exposed. Ideally, your card height should equal the pocket depth + rack exposure + 1/4". Card height MUST exceed pocket depth by at least 1/2" or you will have trouble removing the card once it's inserted.

Pocket thickness (G) should be considered when using a rack for a special purpose other than single paper items, such as brochure storage, etc. Most time card racks have a pocket thickness of 1/4" or less while file folder racks have a pocket thickness up to a 1/2" or more. Furthermore, time card rack slots are fixed, while multi-purpose rack pockets float allowing thicker items be placed in some pockets while limiting use of neighboring pockets.